WM-4346 Mini-ITX Industrial Wallmount Case
WM-4346Mini-ITX Industrial Wallmount Case
  • Extended height Mini-ITX wallmount case with equipment mounting plenum
  • Upper mounting plate with DIN rail, VESA 75mm/100mm, or L-Bracket mounts
  • 1x full height single slot card slot (max 8" depth)
  • 3x 3.5" HDDs and 1x 2.5" SSD boot drive mount
  • 4x USB panel mount and 2x COM port panel mount on inner chassis
  • 120mm PWM fan with top-out airflow
  • Removable 30 PPI air filter (clean with water, vacuum, or compressed air)
  • Rugged all steel chassis with powder coat finished door (optional colors)
  • 7x 1/2 inch conduit holes for secure top side wire entry / exit
  • FlexATX form factor power supply

Key Features

Internal Mounting Plenum with DIN Rail and VESA Mount

Securely install network equipment, hardware controls, PLCs and more

The WM-4346 features a removable mounting plate with combination VESA 75mm/100mm and DIN Rail mounts. We also offer built to order mounting plates that can be configured to hold clients specific configurations of add-on equipment tailored to their deployment application.

Removable, Washable, Reusable Air Filter

Cleaned with water, vacuum or compressed air

The WM-4344 case features a 30 PPI reticulated polyurethane foam filter mounted in a bottom of chassis drop-down tray. The filter material can be cleaned with compressed air or vacuum cleaner while still in the case, or removed from the tray and washed by hand with water.

Optional higher grade filter materials are available, please contact us with your requirements.

Secure Mounting and Cable Routing

all steel chassis with locking cabinet door and low noise variable speed fan

Quickly installs by drilling two bolts to top keyed positions, placing the outer chassis onto the partially installed bolts and then installing the lower two bolts. Inner tray with components preinstalled easily mounts inside the wall mounted exterior chassis.

Cable routing in and out of chassis can be installed through 1/2" conduit or secured via cable strain relief plugs.

Inner System Tray

Makes installation, upgrades and maintenance easier

The removable inner tray allows cable routing and component integration to be configured independent of the installation location. Setup the system in your ESD safe environment then quickly deploy to the job site. The tray installs by setting into rails and then tightening 2 screws on the top front for secure clamping and added rigidity. If a critical component fails the entire tray can be swapped for minimal maintenance downtime.

Technical Specifications

Features
  • Removable inner Motherboard/Power Supply/HDD tray for easy maintenance and integration.
  • Secure wallmounting base chassis with hinged locking door.
  • Secure cable routing via conduit tubing, cable strain reliefs, or through secure cable mounting clamp.
  • Zip-tie bracket for cable routing and cable tug-resistance.
  • Removable, washable, reusable industrial grade air-filter.
  • Top-out exhaust cooling configuration for added dust resistance and superior thermal performance.
Expansion
  • (1x) mounting plate above system tray
  • Please discuss required DIN rail, VESA or other mounting with our sales or engineering team
Motherboard
  • Mini-ITX
Card Slots
  • (1x) Full Height, Single Slot Cutout
  • Cards up to 8" maximum length
Cable Entry / Exit
  • Optional Conduit Knock-Outs, Foam Cable Clamp w/Zip Tie Bracket, Custom Cutouts, etc
  • Plese discuss conduit and cable entry/exit configuration with our sales or engineering team
  • No engineering or design charges for top plate modifications
Drive Bays
  • (3x) 3.5" HDD Mounts
  • (1x) 2.5" HDD/SSD Mount
External I/O
  • Power Status LED, Green
Internal I/O
  • (1x) USB 2.0 Port
  • (1x) Power/Reset Switch
  • (4x) USB Panel Mount Locations
  • (4x) COM Port Panel Mount Locations
Cooling
  • (1x) 120mm PWM double ball-bearing fan with 80 CFM airflow
  • (1x) 30 PPI Reticulated Polyurethane Air Filter
  • Lower drop-down filter tray can be opened even when chassis door is locked.
  • Filter can be removed from tray and cleaned with water, or cleaned in place with vacuum or compressed air.
Power supply
  • FlexATX
Material
  • ASTM-A-653 G30 Zero Spangle Galvanized Steel
  • 20 Gauge
Finish
  • Black Fine Texture Powder Coat
  • Optional logo screen printing, full color
  • Alternative powder coat colors at no additional charge with 10pcs MOQ.
Dimensions (HxWxD)
  • 19-7/8" x 13" x 6"
  • 504.825mm x 330.20mm x 152.40mm
Weight
  • lbs ( kg )
Homologation
  • FCC Class A Compliant
  • IP30 / NEMA 1
  • EN 62262 - IK08
Temperature
  • 32°F to 158°F
  • 0ºC - 70ºC
Humidity
  • 0% to 90% non-condensing

Documentation & Drivers

Documents