|
|
WM-5357 | MicroATX Wallmounting PC Cabinet Case |
- Rugged Cabinet Door Style Wallmount Computer Case
- Removable System Integration Tray (Motherboard, Drives, Power Supply, Fans)
- Subsystem mounting tray installable underneath system tray
- Direct into conduit, strain relief plugs, or top-out cable clamp cable routing
- Supports MicroATX form factor motherboards
- (1x) FlexATX Form Factor Power Supply up to 500W
- (4x) Full Height Cards Slot Cutouts (maximum 9" length)
- (2x) 120MM fan with top-out air flow, industrial grade air-filter
- (8x) 3.5" HDD Mounts, (18x) 2.5" HDD Mounts or any combination thereof
- 30PPI Reticulated Polyurethane Air Filter, optional Aluminum Mesh Air Filter
- Manufactured in the USA, full and semi-customization available
|
|
Key Features
|
System Peripheral Mounting Tray
Securely install virtually any low profile network, storage, power or USB device
Lower system tray allows configured installs of required system accessories such as routers, switches, injectors, uninterruptible power supplies, back up batteries, DAS devices and more via built to order custom mounting tray.
|
High Capacity Storage
Mounts up to 19x 2.5" SSD, 8x 3.5" HDD or any combination thereof
WM-5357 features a removable HDD storage bracket with leveraged forward drop. Mounting holes for up to eighteen 2.5" SSD or HDD and eight 3.5" HDD allows systems to store over 32TB (4TB HDD) of platter media, or 18TB (1TB SSD) of high performance solid state media.
Additional 1x 2.5" SSD mounting accommodates system boot or cache drive for enhanced system performance.
|
|
|
Removable, Washable, Reusable Air Filter
Cleaned with water, vacuum or compressed air
The WM-5357 case features a 30 PPI reticulated polyurethane foam filter mounted in a bottom of chassis drop-down tray. The filter material can be cleaned with compressed air or vacuum cleaner while still in the case, or removed from the tray and washed by hand with water.
Optional higher grade filter materials are available, please contact us with your requirements.
|
Secure Mounting and Cable Routing
NEMA 1 rated wall mounted enclosure with conduit based cable entry/exit
Quickly installs by drilling bolts to the top keyed positions, placing the outer chassis onto the partially installed bolts, and then installing the lower two bolts. Inner trays and HDD bracket can then be mounted inside the exterior chassis.
Cable routing in and out of chassis can be installed through 1/2" conduit or secured via cable strain relief plugs or slot clamp.
|
|
|
Inner System Tray
Makes installation, upgrades and maintenance easier
The removable inner tray allows cable routing and component integration to be configured independent of the installation location. Setup the system in your ESD safe environment then quickly deploy to the job site. The tray installs by setting into rails and then tightening 2 screws on the top front for secure clamping and added rigidity. If a critical component fails the entire tray can be swapped for minimal maintenance downtime.
|
---|
Technical Specifications
Features
|
- Motherboard/Power Supply/HDD tray that hinges and screws into place inside chassis for easy maintenance and integration.
- Secure wallmounting base chassis with hinged locking door.
- Secure cable routing via conduit tubing, cable strain reliefs, or through secure cable mounting clamp.
- Zip-tie bracket for cable routing and cable tug-resistance.
- Removable, washable, reusable industrial grade air-filter.
- Top-out exhaust cooling configuration for added dust resistance and superior thermal performance.
|
Expansion
|
- (1x) 2" tall mounting tray below system tray
- Please contact us with your tray mounting requirements
|
Cable Entry / Exit
|
- (5x) 1/2" Conduit Junction Knock-Outs
- (2x) 3/4" Conduit Junction Knock-Outs
- (1x) 1" Conduit Junction Knock-Out
- (1x) Cable clamp slot with hold down gasket and cable zip tie bracket
|
Motherboard
|
|
PCI/PCIe Card Slots
|
- (4x) Full Height Card Slots
- 9.00" maximum card length, up to 10" without HDD in bracket
|
Drive Bays
|
- up to (8x) 3.5" HDD Mounts, (18x) 2.5" SSD, or any combination thereof
- additional 1x 2.5" SSD mount for boot drive
|
External I/O
|
|
Internal I/O
|
- 5x USB Panel Mount Holes
- 2x COM Port Panel Mount Holes
- Power/Reset Momentary Rocker Switch
|
Cooling
|
- Top-out exhaust cooling configuration for added dust resistance and thermal performance
- (2x) 120mm PWM ball-bearing fan with 80 CFM airflow at 38 dB/A
- (1x) 30 PPI Reticulated Polyurethane Air Filter
- Filter can be removed from chassis and cleaned with water, or cleaned in place with vacuum or compressed air
|
Power supply
|
|
Material
|
- SECC — Steel, Electrogalvanized, Cold rolled, Coil, 16 and 18 Gauge
|
Color
|
- Black powdercoat door, unfinished steel chassis.
- Optional stocked or custom order colors.
|
Lock
|
- (1x) Locking Push Button Slam Latch w/ (2x) Keys
|
Dimensions (HxWxD)
|
- 24.25" x 15.00" x 7.75"
- 615.95mm x 381mm x 196.85mm
|
Weight
|
|
Homologation
|
- FCC Class A Compliant
- IP30 / NEMA 1
- EN 62262 - IK08
|
Temperature
|
|
Humidity
|
|
Chassis
| Description
| SKU
| MOQ
| BTO
|
WM-5357-A
|
- MicroATX Wallmounting Chassis with Internal Mounting Tray
- (2x) 3/4", (7x) 1/2", and (1x) 1/2" or 1" Conduit Knock-Outs, Cable Clamp Slot
- Does not include lower mounting tray
|
|
|
|
Components
| Description
| SKU
|
Power Supplies
|
- 270W FlexATX
- Low Noise, 80+ Bronze
|
|
|
|
|
|
|
|