Sliger proudly manufactures all of its products in the USA.

2U Chassis

MicroATX motherboard & SFX PSU CX2130a - 13" deep, 4x 80mm fans CX2130c - 13" deep, 3x 80mm fans, 2x 3.5" adapter bays CX2130x - 13" deep, 3x 80mm fans, internal storage CX2151a - 15" deep, 4x 80mm fans, full-height 2-slot GPU CX2151c - 15" deep, hot-swap 3.5" bays, full-height 2-slot GPU CX2151x - 15" deep, internal 3.5"/2.5" storage, full-height 2-slot GPU ATX motherboard & FlexATX PSU CX2137a - 13" deep, 4x 80mm fans CX2137b - 13" deep, 3x 80mm fans CX2177a - 17" deep, 4x 80mm fans CX2177c - 17" deep, 3x 80mm fans, 2x 3.5" adapter bays CX2177x - 17" deep, 3x 80mm fans, internal storage CX2257g - 25" deep, 4x 80mm fans, 4x 5.25 Bays

3U Chassis

SFX power supply, 8x PCIe slots CX3150a - 15" deep, 360mm AIO CX3150i - 15" deep, 240mm AIO and 1x 5.25" Bay CX3150x - 15" deep, 240mm AIO and 3x 3.5" HDD CX3170a - 17" deep, thicker radiators/fans CX3170a XL - 17" deep, EATX/SSI EEB motherboard, 3x 3.5" HDD CX3170i XL - 17" deep, EATX/SSI EEB motherboard, 1x 5.25" Bay CX3250g - 25" deep, 360mm AIO and 6x 5.25" Bay large 3-slot GPU on PCIe riser (horizontal) CX3151a - 15" deep, 360mm AIO CX3151i - 15" deep, 240mm AIO, 1x 5.25" Bay CX3151x - 15" deep, 240mm AIO, 3x 3.5" HDD CX3171a - 17" deep, longer GPU or thicker radiators/fans CX3171a XL - 17" deep, eATX motherboard, 3x 3.5" HDD CX3171i XL - 17" deep, longer GPU, 1x 5.25" Bay CX3251g - 25" deep, 360mm AIO and 6x 5.25" Bay ATX power supply, limited to 5x PCIe slots CX3152a - 15" deep, 360mm AIO CX3152i - 15" deep, 240mm AIO and 1x 5.25" Bay CX3172a - 17" deep, thicker radiators/fans CX3172a XL - 17" deep, EATX/SSI EEB motherboard CX3172i XL - 17" deep, EATX/SSI EEB motherboard, 1x 5.25" Bay CX3252g - 25" deep, 360mm AIO and 6x 5.25" Bay 3U NAS Storage CX3701 - 15" deep with Mini-ITX motherboard CX3702 - 18" deep with MicroATX motherboard

4U Chassis

15" 4U for ATX motherboards CX4150a - 360mm AIO CX4150i - 360mm AIO and 1x 5.25" Bay CX4150e - 240mm AIO and 2x 5.25" Bay 17" 4U high end ATX/EATX builds CX4170a - 360mm AIO and 3x 3.5" HDD CX4170i - 360mm AIO and 3x 3.5" HDD / 1x 5.25" Bay CX4170e - 240mm AIO and 2x 5.25" Bay 20" 4U for large EATX/EEB motherboards and power supplies CX4200a - 360mm AIO and 3x 3.5" HDD CX4200i - 360mm AIO and 3x 3.5" HDD + 1x 5.25" Bay CX4200e - 240mm AIO and 2x 5.25" Bays CX4200f - 240mm AIO and 3x 5.25" Bays 4U NAS Storage CX4712 - ATX motherboard, 360mm AIO support CX4713 - SSI-EEB/eATX motherboard, 360mm AIO support CX4250g - ATX motherboard, 360mm AIO, 8x 5.25" Bays

Storage Chassis

2U Storage CX2257g - 25" deep, 4x 80mm fans, 4x 5.25 Bays 3U Storage CX3701 - 15" deep, 10x hot-swap 3.5" HDDs, mITX motherboard CX3702 - 18" deep, 10x hot-swap 3.5" HDDs, mATX motherboard CX3250g - 25" deep, 360mm AIO and 6x 5.25" Bay CX3251g - 25" deep, 360mm AIO and 6x 5.25" Bay CX3252g - 25" deep, 360mm AIO and 6x 5.25" Bay 4U Storage CX4712 - 25" deep, 10x hot-swap 3.5" HDDs, 2x 5.25" Bays CX4713 - 28" deep, hot-swap 3.5" HDDs, 2x 5.25" Bays CX4250g - ATX motherboard, 360mm AIO, 8x 5.25" Bays

Desktop

S630 - MicroATX SFF PC Case S640 - E-ATX Desktop PC Case

CX3702 18" 3U | 10x 3.5" Drive NAS for MicroATX

/ /

CX370218" 3U | 10x 3.5" Drive NAS for MicroATX

10x Trayless 3.5" SATA or SAS HDD Hot-Swap Bays
MicroATX motherboard compatibility with 4x PCIe slots
4x internal 2.5" SSD mounts
Magnetic front panel with dust filter and locking mechanism
Mounts up to 2x 120mm Exhaust Fans; supports up to 1x 120mm AIO
SFX or SFX-L PSU compatibility
Made in USA with US materials

Discontinuation

The planned discontinuation date for this product is December 31st, 2026. After that date, this product will no longer be available for purchase. If you have questions or concerns about this product, please contact us at orders@sliger.com or 1 (775) 356-5595 for more details.

Motherboard	Mini-ITX (L x W: 170mm x 170mm) [6.7" x 6.7"] Deep Mini-ITX (L x W: 170mm x 209mm) [6.7" x 8.2"] MicroATX (L x W: 245mm x 245mm) [9.6" x 9.6"] NOTE: Motherboard mounting tray can be slid out of case to simplify assembly and maintenance
CPU Air Coolers	Max Height: 110mm RECOMMENDED CPU COOLERS Noctua D9L Thermalright SI-100 Thermalright Silver Soul 110 ID-COOLING IS-67-XT
CPU Liquid Coolers	One (1) 92mm radiator (Asetek 645LT) with 120mm to 92mm adapter 92mm to 120mm fan adapter is a 3D printed part One (1) 120mm radiator One(1) 120mm liquid cooler (Asetek 650LKS) - maximum 27mm thickness
Filter Foam	Includes one (1) washable / reusable dust filter 30 ppi open cell reticulated polyether filter foam with flame resistant rating, UL94 HF1, UL FILE NO E93229(N) Alternate density and/or materials such as aluminum mesh available for OEM projects
Fan Mounting	Rear Mounting for one (1) 120mm fan One(1) 120mm fan mounting spots, up to 38mm thick RECOMMENDED 120mm FANS Noctua A12x25 PWM Noctua A12x25 Chromax Black Arctic P12 MAX Phanteks T30 Corsair RS120 MAX Lian Li UNI Fan P28 Lian Li UNI Fan SL-Infinity Any fan from Dynatron Side Mounting for one (1) 120mm fan One(1)120mm fan mounting spots, up to 25mm thick
GPU / PCIe Cards	Four (4) Full height PCIe card slot cutouts Maximum card height: 115mm - including power connectors ENSURE CLEARANCE FOR 12-pin 12VHPWR / CEM5 POWER CONNECTOR Maximum card length: 245mm NOTE: If using a dual slot PCIe card, such as a GPU, you may need to use a slim (15mm thick) 120mm fan on the side vent. Total Internal Depth: 255mm GPU length + Power connector length must equal less than 245mm total.
Storage	Four (4) 2.5" drives up to 7mm thick Four(4) 2.5" SSD/HDD mounting points (behind power button and USB front panel area) Ten (10) 3.5" drives Ten(10) 3.5" SAS or SATA Hard Drive Disks accessible by removing the magnetic Faceplate Case includes ten(10) SATA/SAS SFF 8482 male to SATA female adapters (preinstalled in case) Case has a locking mechanism and key, as well as thumb screws, to secure drives Case also includes two(2) SATA power distribution cables (One(1) SATA power male to five(5) SATA power female) Case does NOT include any data cables Four(4) shoulder screws attach to each 3.5" HDD The shoulder screws guide HDDs through slots and align the drive to a backplane mounted SATA/SAS to SATA adapter User must connect SATA data and power cables on inside of case to these SATA/SAS to SATA adapters Hot-swap support depends on HBA / RAID card, motherboard and OS Please note that connecting a SAS drive to a SATA port will operate as a SATA drive A SAS controller can control SATA drives, but a SATA controller cannot control SAS drives 2.5" to 3.5" Converter Mount Bracket to mount SSDs in the front bays: Orico Converter Mounting Bracket
Front Panel I/O	One (1) Momentary Switch / Power Status LED (Ring Shape, White) Two (2) USB 3.0 Type A Port One (1) USB 3.2 Type C 10Gbps Port
Power Supply	One (1) SFX / SFX-L power supply Supports up to 1x SFX or 1x SFX-L form factor PSU Recommended Models: Cooler Master V1100 SFX Platinum 1100W CORSAIR SF1000 1000W Seasonic FOCUS SPX-750 750W FSP Dagger Pro 850W FSP Dagger Pro 650W FSP SFX Pro 450W
Rack Rails	General Devices C300-S Series Rack Rails are not included by default, must be purchased on the configuration or parts page. Other Brand Compatibility Brands such as iStarUSA TC Rails are natively compatible. Please contact our support team for any compatibility questions.
Warranty	Case 5 Years Chassis, USB cables, Power Button(s), Power Cable(s) 5 Years Liquid Coolers & Fans 3 Years Please see our warranty policy for additional conditions, exclusions, and limitations. Warranty Policy Rack Rails 3 Years

Chassis Weight	22.75 lbs [10.32 kg]
Chassis Outer Dimensions	18" x 17" x 5.22" [DxWxH] 457.20mm x 431.80mm x 132.59mm [DxWxH]
Rack Slide Kits	Rack Slide Kits - All Rail Kits Will Ship In Separate Box GDRAIL-14XX - 6lbs [2.72kg] GDRAIL-20XX - 7.5lbs [3.4kg] GDRAIL-26XX - 8.75lbs [3.97kg]
Fans	.7lbs per fan Three(3) fans - 2.1lbs [.95kg] Five(5) fans - 3.5lbs [1.59kg] Six(6) fans - 4.2lbs [1.95kg]
Coolers	Liquid Coolers Asetek 612X-M2 120mm AIO - 1.7lbs [.77kg] Asetek 624S-M2 240mm AIO - 1.6lbs [.73kg] Asetek 636S-M2 360mm AIO - 1.9lbs [.86kg] Asetek 836SA 360mm Threadripper AIO - 2.35lbs [1.07kg] Retention kits - .25lbs [.11kg]
Brackets	Fan Brackets Rear Fan - .25lbs [.11kg] Rear Fan w/ A12x25 - .95lbs [.43kg]
Packaging Materials	Packaging Materials (Box, Tape, Foam Corners) 3.25lbs [1.47kg] Shipping Box Outside Dimensions 20.5" x 18.5" x 11.5" Shipping box is ECT52, Double Wall, Kraft Brown Standard SLIGER branded tape, optional unbranded kraft brown tape for business customers

Product Lifecycle	Planned availability through 2032 Extended availability beyond 8 years as built-to-order(BTO) with a 25 unit MOQ
EMI / Safety	Case cannot be certified as a standalone item. Certifications must be sought as a fully integrated system. Contact us before using case for FCC, CE, UL, IEC, or other safety / regulatory compliance. Alternate vent sizes, brackets, EMI springs, and/or powder coat masking, may be required depending on certifications sought. UL listed wire, fans, coolers, and materials where possible
Industry Standards	19-inch rack standard Electronic Industries Alliance EIA-310-D International Electrotechnical Commission IEC 60297-1 / IEC 60297-3-100 Consumer Electronics Association CEA-310-E Deutsches Institut für Normung DIN 41494
Environmental	Compliant with RoHS Directive 2002/95/EC, 2015/863 RoHS2, RoHS3 (EU) with all applicable exemptions Regulation (EC) No 1907/2006 Registration, Evaluation, Authorization and Restriction of Chemicals (REACH) Compliant for all Substances of Very High Concern (SVHC) Conflict–Free Sourcing Initiative (CFSI) with Conflict-Minerals Report (CMRT) available upon request Compliant with US EPA PBT Section 6 Toxic Substances Control Act (TSCA)
Import / Export	Harmonized Tariff Schedule (HTS) / HS Schedule B 8473.30.1500 - COMPUTER CASES AND ACCESSORIES Export Control Classification Number [ECCN] EAR99 - LOW-TECHNOLOGY CONSUMER GOODS Country of Origin United States of America "Made in USA" per Federal Trade Commission (FTC) subchapter C title 16 Code of Federal Regulations Part 323 TAA (Trade Agreements Act) Compliant for GSA Schedules, IDIQ contracts, and DoD contracts Compliant with Section 889 of Federal Acquisition Regulation (FAR) of National Defense Authorization Act (NDAA)

Assorted Manuals	Asetek Standard AIO Product Specifications Asetek Threadripper AIO Product Specifications
Community Help Links	Dedicated Sliger Subreddit [www.reddit.com/r/sliger] Sliger PC Cases Unofficial Discord [for questions and build help]
Install Guides	Rack Rail Installation Screw Guide

CX370218" 3U | 10x 3.5" Drive NAS for MicroATX

Discontinuation

Technical Specifications

Weight & Dimensions

Case Mechanicals

Regulatory & Homologation

Guides & Links